Shenzhen Sowze Security Electronic Co.,Ltd
Add: 6th Floor, Bole industrial, Bantian Second Sub-district office, Longgang district, Shenzhen, China
Car camera as a safety device in the car, many owners will choose to install it, but in order to ensure the clarity of the car camera, in addition to the purchase of good quality products, the car camera installation is also very important, then in the process of installing the car camera, What do we need to pay attention to?
Car camera installation method
1. First of all, the main vehicle should first remove the power supply connection cable from the on-board battery, and place the removed connection wire away from the electrode to prevent the power supply from accidentally turning on.
2, then the car mainly to find a good car camera installation location. General car camera mounted on the license plate license plate position and drilling installation.
3. If the owner chooses to install the vehicle camera on the license plate light, simply use the small screw provided inside the camera to fix the camera on the license plate light. Through the adjustment of iron pieces or gaskets in the accessories, the camera can achieve the best reversal perspective. This kind of installation type of reversing camera is currently a more popular one, the appearance is more hidden, and installation is more relaxed.
4, if the owner chooses to drill installation, embedded inside the bumper, the advantage of this method is not to drill holes in the metal parts behind the car. Because the bumper is a plastic piece, the camera is relatively easy to trace. And balance with the surface of the rear car to prevent theft.
5, the last line installation, first the camera and the car reversing lamp power line connection; then the camera's video cable and video extension cable; finally restore the battery power supply, start the car, hang up the reverse gear, you can on the car display See the reverse image on it.
1. Although the car owner installed a car camera, he cannot rely on the reversing rear view system to reverse the car. He can only consider it as an auxiliary tool for reversing the car.
2. When the vehicle owner is installing, it must be determined that the on-board monitor must be properly connected. If the monitor does not provide an AV input interface, the corresponding video cable must be found or a video switching device must be installed so that the rear view image can be displayed normally.
3, Do not easily connect the car power supply directly to the vehicle battery power, so as to avoid instability of the power supply.
Tips: The above is the car camera installation method, the owner must pay attention to the installation steps in their own installation, to ensure their own legitimate interests.